HYDROPHOBIC COATING FOR DFI TREATED SURFACES
Revitalizer™ Coating
Specifically-formulated protective glass coating for DFI treated surfaces. For new applications, check out the Glass Defender™ Kit or Clear-Fusion™ V.
PRODUCT DESCRIPTION
Ensure optimum performance and long-term water repellency on your Diamon-Fusion® (or DFI) treated shower doors and other glass surfaces with Revitalizer™ coating.
Once applied to the glass, Revitalizer™ rejuvenates the existing coating, helping it to once again seal the surface and make it water repellent. The protective sealant makes the glass easier to clean, and resistant to stains caused by hard water, soap scum, and outside pollutants. And like other DFI protective coatings, Revitalizer™ is also UV-resistant and eco-friendly, so no harsh chemical cleaners are needed to care for the glass.
So, whether you want to maintain the hydrophobic (water repellent) effects on your shower glass, windows, glass railings, or granite, tile, and quartz, Revitalizer™ can get the job done. As long as they were previously treated with Diamon-Fusion® or any DFI protective coating, you are good to go.
The coating is formulated using the same nanotechnology seen in Diamon-Fusion® and is extremely simple to apply — available in either a towelette or spray bottle application.
FEATURES & BENEFITS
- Designed for DFI treated glass surfaces
- Available in three (3) different sizes
- Coverage varies on product type
- Restores water repellent nature of glass
- Makes glass cleaning easier and less frequent
- Protects against hard water stains
- Keeps glass looking cleaner for longer
- Ensures long-lasting performance
- No cure time – coating instantly dries
APPLICATION INSTRUCTIONS
Read the instructions below or download the PDF Guide.
- Clean and dry the surface that is to be treated – the cleaner the surface, the better the coating.
- Once thoroughly clean and dry, apply the Revitalizer™ protective coating in a well-ventilated area. Spray the coating as needed and wipe with a microfiber towel using firm circular, overlapping motions, going over the entire area at least twice.
- Remove any excess solution by sprinkling the glass with water and wiping the surface with a clean dry cloth or paper towel until glass is clear and sparkling.
- Reapply the coating as needed or when water repellency begins to wane.
Important: For Revitalizer™ NanoPax® applications, use firm circular, overlapping motions, going over the entire surface at least twice and only unfold the towelette as needed.
Important: If the glass to be treated is heavily stained, DFI recommends using the Express Care Kit or Restoration Powder™, along with a white scrubber pad, to remove any stains and prep the surface for the Revitalizer™ coating application.
Important: In less-ventilated areas, apply Revitalizer™ treatment in small sections.
CARE INSTRUCTIONS
For glass surfaces including shower doors, glass railings, windows, and mirrors, download the PDF guide here.
For silica-based surfaces including ceramic tile, granite, porcelain, quartz, and grout, download the PDF guide here.
SHIPPING & RETURNS
Shipping
Free shipping on orders over $75. All domestic and international (Canada) orders are shipped through USPS Priority Mail. International shipping does not include duties and taxes. Shipping is calculated in business days and prices vary depending on weight.
For more information on shipping and tracking, click here.
Returns and Refunds
We hope that you are completely satisfied with your purchase. If for some reason you are not satisfied with the product(s) you purchased, we offer a 30-day money back guarantee on all our products.
For more information on returns and refunds, click here.
Buy 10 or more products and save 15%, no coupon code needed.
All orders in the U.S. over $75 receive free shipping.
Revitalizer™ Coating Product Overview
Glass coating features and benefits
Revitalizer™ is a protective glass sealant specifically formulated for use on DFI treated surfaces. The coating helps revitalize (bring back to life) the existing DFI coating applied to the surface, helping to make it water repellent and stain resistant, again.
Ensures water repellency of DFI treated surfaces
Chemically bonds to glass, creating an ultra-thin barrier
Seals glass to repel water and prevent stains
NanoPax® (easy-to-apply towelette)
4 oz. bottle (118 mL)
16 oz. bottle (472 mL)
NanoPax® (towelette) – 14 sq. ft.
4 oz. bottle – 236 sq. ft.
16 oz. bottle – 944 sq. ft.
Coating instantly dries; glass can be used immediately
Yes, eliminates the need for chemical cleaners
Best if applied using a microfiber towel
Download instructions here
Suitable for a wide range of surfaces
Showers
Glass Railings
Windows
Ceramic Tile
Over time, some glass surfaces inherently take more abuse than others and may be exposed to damage from mineral deposits, soap scum, lime scale, and more. DFI’s Revitalizer™ is used to maintain the beauty of such surfaces, specifically treated with DFI’s protective coatings, helping to keep them water-repellent, easier to clean, and optimally performing.
Enjoy more free time and cleaner surfaces with Revitalizer™. By following our basic care instructions, you can prolong the life of your glass and experience reduced cleaning times. The Revitalizer™ coating is also eco-friendly so no chemical cleaners are needed to maintain the glass, though DFI has an approved list of chemical cleaners should you want to use them.
Over time, some glass surfaces inherently take more abuse than others and may be exposed to damage from mineral deposits, soap scum, lime scale, and more. DFI’s Revitalizer™ is used to maintain the beauty of such surfaces, specifically treated with DFI’s protective coatings, helping to keep them water-repellent, easier to clean, and optimally performing.
Enjoy more free time and cleaner surfaces with Revitalizer™. By following our basic care instructions, you can prolong the life of your glass and experience reduced cleaning times. The Revitalizer™ coating is also eco-friendly so no chemical cleaners are needed to maintain the glass, though DFI has an approved list of chemical cleaners should you want to use them.
What our customers are saying
Revitalizer™ Coating Reviews
FAQ
Can Revitalizer™ be used on glass not treated with DFI’s protective coatings?
No, Revitalizer™ is only designed for use on surfaces that have been treated with DFI protective coatings. For applications on non-treated glass surfaces, DFI recommends using the Glass Defender™ Kit or Clear-Fusion™ V, which can be used to protect new or existing surfaces.
What if there are stains or buildup on the surface?
DFI recommends cleaning all existing stains on the glass surface(s) that are to be treated with Revitalizer™, or any of DFI’s protective coatings. Check out our list of stain removers that can be used to remove most hard water stains, soap scum, mineral deposits, and more.
Does the surface need to be completely dry before applying the Revitalizer™ coating?
Yes, please make sure any water droplets are completely removed from the glass before applying Revitalizer™.
How long does Revitalizer™ last?
Revitalizer™ is meant to reinvigorate the DFI coating that has been applied to the glass, making it water repellent and stain resistant, again. With proper care, the coating will last several years; however, longevity is also dependent on hard water levels, usage, and much more.
What if too much of the coating is applied?
Be careful not to apply too much Revitalizer™ to the glass surface. If so, a haze will form, in which case DFI recommends using isopropyl alcohol to clean the surface.
How long do you have to wait to use the glass, after application?
No time at all. Revitalizer™ has no cure time, so once the coating has been applied to the glass surface, it is ready for use.
Does the glass need to be maintained after applying Revitalizer™?
Yes, please care for the glass in the same way you would when Diamon-Fusion® or any of DFI’s protective coatings were applied to the surface. If needed, you can also download our basic glass care instructions. For silica-based surfaces, download our basic care instructions here.
Learn
As a leading protective (hydrophobic) coating manufacturer, Diamon-Fusion International (DFI) has created a wide range of products for restoring and protecting glass and silica-based surfaces. Our protective coating technology is used and trusted by leading manufacturers, with representation in countries throughout the world. To learn more about DFI and the science behind our technology, click below.