COMPACT TREATMENT KIT FOR DFI GLASS
- Removes soap scum and hard water buildup
- Brings DFI glass coating back to life
Express Care Kit
Easily remove hard water stains on your Diamon-Fusion® or DFI treated surfaces, and protect it with the Revitalizer™ coating through our Express Care Kit package.
For new glass applications, check out the Glass Defender™ Kit or Clear-Fusion™ V.
PRODUCT DESCRIPTION
Created as a more compact version of the Consumer Maintenance Kit, the Express Care Kit (ECK) is designed to maintain the performance of glass surfaces that have already been treated with Diamon-Fusion® or any of DFI's protective coatings. It is DFI’s #1 aftercare (restoration) kit.
The kit comes complete with four (4) Restoration Powder™ NanoPax®, two (2) Revitalizer™ coating NanoPax®, and various application products that are easy to use and can help restore any glass surface. So, whether you need to remove stains on your glass or restore the water repellency coating performance, the ECK has everything you need to get the job done.
Each kit treats up to 56 sq. ft. of glass, keeping your surfaces looking like-new, as well as helping to remove any water spots that may have formed on your glass. The kit is small, easy to use, and the most cost-effective aftercare product DFI offers.
FEATURES & BENEFITS
- Only for use on surfaces treated with Diamon-Fusion®
- Each kit treats up to 56 sq. ft.
- Eliminates soap scum and hard water buildup
- Shields glass with hydrophobic coating
- Makes cleaning easier and less frequent
- Keeps glass looking cleaner for longer
- No cure time – coating instantly dries
- Eco-friendly using chemically inert formula
WHAT'S INCLUDED
- Two (2) Restoration Powder™ NanoPax® – Use to remove hard water stains, soap scum, and more (product coverage varies on extent of damage).
- Four (4) Revitalizer™ NanoPax® – An optically clear, water repellent coating that restores DFI treated surfaces to like-new performance (each NanoPax® treats approximately 14 sq. ft.).
- One (1) White Scrubber Pad (3x2) – Use to clean glass with Restoration Powder™.
- One (1) Microfiber Towel – Use to polish glass after applying Revitalizer™.
- One (1) Nylon Cleaning Puff – Use to wipe down the treated surface when needed.
APPLICATION INSTRUCTIONS
Read the instructions below or download the PDF Guide.
- Start by wetting the glass and using the white scrubber pad with Restoration Powder™ (just a light touch) to remove any stains. If stains persist, use more pressure, but not so much as to damage the DFI coating.
- Once thoroughly clean and dry, apply the Revitalizer™ protective coating in a well-ventilated area, using firm circular, overlapping motions, going over the entire area at least twice. Only unfold the towelette as needed.
- To test the application, spray the glass with water and look for uniform water beads. For areas that are not beading up uniformly, dry the entire surface and reapply the Revitalizer™ coating as needed.
- Finalize the application process by either polishing the glass with the microfiber towel or washing with soapy water.
Important: It is recommended to test a small amount of Restoration Powder™ on an inconspicuous area before use to ensure compatibility. Not for use on lacquered surfaces.
CARE INSTRUCTIONS
SHIPPING & RETURNS
Shipping
Free shipping on orders over $75. All domestic and international (Canada) orders are shipped through USPS Priority Mail. International shipping does not include duties and taxes. Shipping is calculated in business days and prices vary depending on weight.
For more information on shipping and tracking, click here.
Returns and Refunds
We hope that you are completely satisfied with your purchase. If for some reason you are not satisfied with the product(s) you purchased, we offer a 30-day money back guarantee on all our products.
For more information on returns and refunds, click here.
Buy 10 or more products and save 15%, no coupon code needed.
All orders in the U.S. over $75 receive free shipping.
ECK Product Overview
Express Care Kit features and benefits
The Express Care Kit is the fastest, most convenient way to care for DFI treated surfaces. Each kit covers up to 56 sq. ft., whether you need to restore the glass and remove hard water stains or bring the coating back to life with Revitalizer™.
Restores and protects DFI treated surfaces
Chemically bonds to glass, creating an invisible barrier
Keeps glass looking cleaner for longer
Covers up to 56 sq. ft. (one [1] avg. shower door)
Coating instantly dries; glass can be used immediately
Yes, eliminates the need for chemical cleaners
Download instructions here
Suitable for a wide range of surfaces
Shower Doors
Windows
Glass Railings
Ceramic Tile
If, and when, stains start to form on glass surfaces that have been treated with DFI’s protective coatings, the ECK has what you need to restore your glass back to life. Each kit includes four (4) Restoration Powder™ NanoPax® that can remove most stains caused by mineral deposits, soap scum, lime scale, and much more.
After removing any stains from the glass or ceramic tile surfaces, each ECK also comes equipped with Revitalizer™ – a protective coating specifically designed for application on DFI treated surfaces. The coating is easy to apply, and will keep the glass looking cleaner for longer, while helping to prevent hard water stains in the future.
Keeping your glass surfaces clean and clear is easy with the ECK. Once the application process is completely finished, DFI recommends following our basic care instructions for glass surfaces to preserve the life of the surface and prevent hard water stains. It is also highly recommended to avoid any abrasive cleaners when cleaning the treated surface.
If, and when, stains start to form on glass surfaces that have been treated with DFI’s protective coatings, the ECK has what you need to restore your glass back to life. Each kit includes four (4) Restoration Powder™ NanoPax® that can remove most stains caused by mineral deposits, soap scum, lime scale, and much more.
After removing any stains from the glass or ceramic tile surfaces, each ECK also comes equipped with Revitalizer™ – a protective coating specifically designed for application on DFI treated surfaces. The coating is easy to apply, and will keep the glass looking cleaner for longer, while helping to prevent hard water stains in the future.
Keeping your glass surfaces clean and clear is easy with the ECK. Once the application process is completely finished, DFI recommends following our basic care instructions for glass surfaces to preserve the life of the surface and prevent hard water stains. It is also highly recommended to avoid any abrasive cleaners when cleaning the treated surface.
What our customers are saying
Express Care Kit Reviews
FAQ
Can the ECK be used on glass not treated with DFI’s protective coatings?
No, the ECK is only designed for use on surfaces that have been treated with Diamon-Fusion® or any of DFI’s protective coatings. For applications on glass surfaces that have not been treated with a hydrophobic coating, DFI recommends using the Glass Defender™ Kit or Clear-Fusion™ V, which can be used to protect new or existing surfaces.
Does the surface need to be completely dry before applying Revitalizer™?
Yes, please make sure any water droplets are completely removed from the glass before applying Revitalizer™.
How long does the Revitalizer™ coating last?
Revitalizer™ is meant to reinvigorate the DFI coating that has been applied to the glass, making it water repellent and stain resistant, again. With proper care, the coating will last several years; however, longevity is also dependent on hard water levels, usage, and much more.
What if too much of the coating is applied?
If too much of the Revitalizer™ coating is applied to the surface, a haze will form. In these situations, DFI recommends using isopropyl alcohol to clean the surface.
How long do you have to wait to use the glass, after application?
No time at all. Revitalizer™ has no cure time, so once the coating has been applied to the surface, it is ready for use.
Does the glass need to be maintained after using the ECK?
Yes, please care for the glass in the same way you would when Diamon-Fusion® or any of DFI’s protective coatings were applied to the surface. If needed, you can also download our basic glass care instructions. For silica-based surfaces, download our basic care instructions here.
Learn
As a leading protective (hydrophobic) coating manufacturer, Diamon-Fusion International (DFI) has created a wide range of products for restoring and protecting glass and silica-based surfaces. Our protective coating technology is used and trusted by leading manufacturers, with representation in countries throughout the world. To learn more about DFI and the science behind our technology, click below.