GROUT AND TILE CLEANER AND SEALANT
- Reduces cleaning time and costs
- Protects against hard water stains and soap scum buildup
Tile and Granite Defender™ Kit
Clean and protect your granite, tile, and ceramic-based surfaces with our all-in-one tile cleaning kit.
FEATURES & BENEFITS
- Covers up to 110 sq. ft.
- Granite, tile, and grout cleaner
- Repels hard water, soap scum, and more
- Cuts cleaning time and effort
- Removes hard water stains and mineral buildup
- Eco-friendly; eliminates chemical cleaners
- Best tile and grout sealant
- Chemically inert - environmentally safe
WHAT'S INCLUDED
- Three (3) Restoration Powder™ NanoPax® – Use to remove hard water stains, soap scum, and more (product coverage varies on extent of damage).
- One (1) Clear-Fusion™ V Bottle (59 mL / 2 oz.) – An optically clear, water repellent coating that protects silica-based surfaces and makes them easier to clean (each bottle treats approximately 110 sq. ft.).
- One (1) White Scrubber Pad – Use to clean surface with Restoration Powder™.
- One (1) Microfiber Towel – Use to polish surface when applying Clear-Fusion™ V.
APPLICATION INSTRUCTIONS
Read the instructions below or download the PDF Guide.
- Start by wetting the surface and using the white scrubber pad with Restoration Powder™ to remove any mineral buildup, soap scum, etc. Clean the grout and tile free from dirt and grime almost effortlessly, even stubborn stains.
- Once thoroughly clean and dry, apply Clear-Fusion™ V protective coating in a well-ventilated area. Spray the coating as needed and wipe with the microfiber towel using firm circular, overlapping motions, going over the entire area at least twice.
- To test the application, spray the surface with water and look for uniform water beads. For areas that are not beading up uniformly, reapply Clear-Fusion™ V as needed.
Important: When applying Clear-Fusion™ V to the surface, we recommend approximately five (5) full sprays for each square foot of tile or granite being treated.
Important: Make sure the microfiber towel is completely dry when wiping in the coating.
CARE INSTRUCTIONS
Read the instructions below or download the PDF Guide.
Shower Tile
For optimum performance, after showering, rinse the tile and wipe down any remaining droplets. You may towel-dry the surface or use a squeegee. Once a month, wet the tile and use a nylon body puff to go over the surface until clean and smooth. Then rinse and dry the tile.
Granite Countertops
Granite countertops can be cleaned with a non-abrasive sponge, any liquid dish soap, and water. Alternatively, you can use any of the recommended cleaning products listed below.
Other Recommended Cleaning Products:
- Ammonia-Free Windex®
- Seventh Generation® Granite & Stone Cleaner
- Mrs. Meyers Multi-Surface Cleaner
- White household vinegar diluted with water
SHIPPING & RETURNS
Shipping
Free shipping on orders over $50. All domestic orders are shipped through USPS Priority or FedEx Ground and all international (Canadian) orders are shipped through FedEx International Ground or FedEx International Economy. International shipping does not include duties and taxes. Shipping is calculated in business days and prices may vary depending on weight and location.
For more information on shipping, click here.
Returns and Refunds
We hope that you are completely satisfied with your purchase. If for some reason you are not satisfied with the product(s) you purchased, we offer a 30-day money back guarantee on all our products.
For more information on returns and refunds, click here.
Buy 10 or more products and save 15%, no coupon code needed.
All orders in the U.S. over $75 receive free shipping.
Tile and Granite Defender™ Kit Product Overview
Grout treatment features and benefits
Protect your tile, granite, porcelain, and ceramic surfaces with the best grout treatment on the market. The Tile and Granite Defender™ Kit has everything you need to remove any existing stains and then protect them with an easy-clean, water repellent coating.
Protects tile and granite from stains and corrosion
Chemically bonds to surface, creating an invisible barrier
Repels hard water, soap scum, and contaminants
Covers up to 110 sq. ft.
Coating instantly dries; surface can be used immediately
Yes, eliminates need for chemical cleaners
Yes, the coating is chemically inert
Best if applied using microfiber towel
Download instructions here
Suitable for a wide range of surfaces
Ceramic Tile
Granite Countertops
Porcelain
Grout
Every day, tile, granite, and other ceramic tile surfaces are exposed to mineral deposits, soap scum, and more which leave the surfaces at risk of being damaged. The Tile and Granite Defender™ Kit comes complete with (3) Restoration Powder™ NanoPax®, that can remove most stains and restore surfaces back to like-new condition. This is also an important step in preparing the surface(s) for the coating application.
Water repellent and easy to clean, DFI’s Clear-Fusion™ V protective coating (included in each kit) chemically bonds to the surface, creating an ultra-thin barrier. The coating is less than 40 nanometers (NM) thin and chemically inert, which means once it is applied to the surface the coating is environmentally safe. Additionally, surfaces treated with Clear-Fusion™ V eliminate the need for chemical cleaners.
Once Clear-Fusion™ V has been applied to the surface, DFI recommends following our basic care instructions on how to maintain and preserve the grout treatment coating. While the coating will help reduce cleaning time and prevent stains, a simple cleaning routine is recommended to extend the life of the surface. Please avoid any abrasive cleaners or sponges when cleaning the treated surface.
Every day, tile, granite, and other ceramic tile surfaces are exposed to mineral deposits, soap scum, and more which leave the surfaces at risk of being damaged. The Tile and Granite Defender™ Kit comes complete with (3) Restoration Powder™ NanoPax®, that can remove most stains and restore surfaces back to like-new condition. This is also an important step in preparing the surface(s) for the coating application.
Water repellent and easy to clean, DFI’s Clear-Fusion™ V protective coating (included in each kit) chemically bonds to the surface, creating an ultra-thin barrier. The coating is less than 40 nanometers (NM) thin and chemically inert, which means once it is applied to the surface the coating is environmentally safe. Additionally, surfaces treated with Clear-Fusion™ V eliminate the need for chemical cleaners.
Once Clear-Fusion™ V has been applied to the surface, DFI recommends following our basic care instructions on how to maintain and preserve the grout treatment coating. While the coating will help reduce cleaning time and prevent stains, a simple cleaning routine is recommended to extend the life of the surface. Please avoid any abrasive cleaners or sponges when cleaning the treated surface.
What our customers are saying
Tile Cleaning Kit Reviews
FAQ
Is the Tile and Granite Defender™ Kit compatible with grout?
Yes, it is. In fact, the Clear-Fusion™ V coating will help protect the grout during the application process.
Is the Clear-Fusion™ V coating safe to apply to countertops and backsplashes?
Yes, once the coating is applied to any silica-based surface, it becomes chemically inert, which means it is rendered harmless and environmentally safe.
Does the surface need to be completely dry before applying Clear-Fusion™ V?
Yes, please make sure any water droplets and dust are completely removed from the surface before applying Clear-Fusion™ V.
How long does the coating last?
Clear-Fusion™ V is a consumer-grade product that provides great protection and water repellency to your surfaces. With proper care, the coating can last for years; however, longevity is dependent on surface exposure, usage, and routine care.
How long do you have to wait to use the surface, after application?
No time at all. Clear-Fusion™ V has no cure time, so once the coating has been applied to the surface, it is ready for use.
Does the surface need to be maintained after applying Clear-Fusion™ V?
Yes, while Clear-Fusion™ V cuts cleaning time and helps prevent hard water stains, there is a basic level of care that needs to be taken. Please download our basic care instructions (for silica-based surfaces) to learn how to maintain the coating and ensure optimum performance.
Do your coatings contain any VOCs?
Yes, they do. DFI recommends applying our protective coatings in a well-ventilated area.
Learn
As a leading protective (hydrophobic) coating manufacturer, Diamon-Fusion International (DFI) has created a wide range of products for restoring and protecting glass and silica-based surfaces. Our protective coating technology is used and trusted by leading manufacturers, with representation in countries throughout the world. To learn more about DFI and the science behind our technology, click below.