What is the difference between Restoration Powder™ and Glass Rescue™?

Glass Rescue™ and Restoration Powder™ are water stain removers for glass – both designed to remove stains on glass or silica-based surfaces caused by hard water, soap scum, mineral deposits, and more. However, Restoration Powder™ is a less concentrated solution and comes in the form of a powder, while Glass Rescue™ is super concentrated meant to remove pre-existing coatings and comes as a paste.

Does Glass Rescue™ leave any residue?

No; however, DFI recommends thoroughly rinsing and drying the glass for optimum performance.

Can Glass Rescue™ be used to remove scratches on glass?

No, while Glass Rescue™ is great for removing hard water stains, it cannot remove scratches on surfaces.

What if the glass is very badly damaged?

Glass Rescue™ is designed to remove most stains; however, there are instances where the glass surface might be damaged beyond repair, mostly caused by severe etching over the years. However, if stains persist, use more pressure to try and remove them.

5 Tips on How to Clean Tile and Grout Effectively

5 tips on how to clean tile and grout effectively

Cleaning tile surfaces and grout can seem like a daunting task, but with the right tips and tools, you can keep them looking pristine with ease. Whether you’re dealing with kitchen backsplashes, bathroom tile walls, or bathtub tile, these tips will help you achieve a sparkling clean finish every time.

1. Sweep regularly

The first step in maintaining grout and tile cleaning is regular cleaning. Dust and debris can accumulate quickly, especially in high-traffic areas.

Use a microfiber towel to dust your tile regularly. This includes, but is not limited to, tile countertops, backsplashes, and bathroom wall tiles.
Vacuum instead if you find it easier than wiping down each surface, as well as using it for harder-to-reach areas.

2. Mop with warm water

Wiping down your tile surfaces with warm water can effectively remove surface dirt and grime.

Fill a bucket with warm water and use a damp rag to clean the tiles.
Avoid overly wet rags, as too much water can seep into grout lines and cause damage over time. For a deeper clean, consider adding a mild detergent to the water.

3. Try natural cleaners

Natural cleaners can be very effective for cleaning tile backsplashes or bathroom tile and grout without harsh chemicals.

Vinegar and water: Mix equal parts of vinegar and water in a spray bottle. Spray the solution on the tiles and wipe clean with a damp cloth.
Baking soda paste: Mix baking soda with a bit of water to form a paste. Apply to grout lines and scrub with a brush. Rinse thoroughly.

4. Protect your tile surfaces

To keep your tile floors looking their best, it’s essential to protect them from stains and damage. This is where DFI’s Tile and Granite Defender™ Kit comes in handy.

Discover the superior tile floor protection and revitalization with DFI’s Tile and Granite Defender™ Kit.
Designed as a heavy-duty tile restoration kit, it serves as the ultimate tile and grout cleaning kit and a floor tile stain remover.
This all-in-one kit offers deep clean solutions for granite, tile, and ceramic-based surfaces, protecting them from hard water stains, soap scum, and other common household blemishes.

5. Seal your grout

Sealing your grout lines is an excellent way to protect them from stains and moisture, and just as important as cleaning grout.

Find a proven grout sealant to ensure the grout lines in your tile surfaces remain in tip top shape.
Use the versatile formula found in DFI’s Tile and Granite Defender™ Kit. It acts as a protectant for grout, ensuring your tile surfaces stay pristine and stain-free.
Apply the coating according to the product instructions and allow it to dry completely before use.

The benefits of DFI’s Tile and Granite Defender™ Kit

The Tile and Granite Defender™ Kit is meticulously crafted to offer superior protection and cleaning for your tile surfaces.

Deep clean solutions: It effectively cleans tile, grout, granite, and ceramic surfaces, removing tough stains and grime.
Versatile formula: Compatible with countertops, kitchen backsplashes, tile, porcelain, and natural stone like granite and quartz.
Protectant for grout: Ensures your grout lines remain clean and easy to maintain.
Water repellent: The treatment repels water, reducing cleaning time and maintenance costs, and helping to prevent stain buildup.
Ideal for residential and commercial spaces: Perfect for maintaining and rejuvenating various flooring surfaces.

Bathroom Shower with White Tile and Small City View

The bottom line

Cleaning tile and grout effectively doesn’t have to be a challenge. By following these simple tips and using high-quality products like DFI’s Tile and Granite Defender™ Kit, you can keep your floors looking beautiful and well-maintained. Regular cleaning, using gentle and natural cleaners, protecting your surfaces, and sealing grout lines will help you achieve a lasting shine and keep your tile surfaces in top condition.

Experience the ease and efficiency of a transformative deep clean and protective sealant with DFI’s protective coatings, ensuring your floors shine brilliantly and remain protected against future wear and tear.